MICTUNING Car Battery Terminal Connectors Kit
This Car Battery Terminal Clamp is a great idea for adding easy to use connections on a battery.
The clamps are designed to hook up all sorts of things and replace the clamps that came with the car/truck/motorhome.
No need to constantly left raising your hood and re-tightening or beating on the connections.
Easy to install, Just make sure the positive clamp goes to the positive post, the negative goes to the negative.
Designed for high-current applications and car audio wiring projects. Help to enhance your car's under-bonnet appearance.
NOTE: The Hole of The Positive Terminal is 19mm, The Negative is 17mm, The Positive is Bigger than The Negative
1x Negative Terminal
1x Positive Terminal
2x Spacer Shims
2x Car Battery Terminal Covers
Clamp Wire Tightly - These Car Battery Terminal Connectors are actually a tight fit and multiple ways to hold the wires. Look great and handy when connecting multiple size wires to the same terminal
Simple Installation - They fit the battery posts with no problems or adjustments. Installation is easy and only required an Alan wrench set. The battery wire is held down tightly with special screws
Positive Negative Terminal - Positive (19mm) Battery Terminal Connector + Negative (17mm) Battery Terminal Connector. 2 copper spacer shims provided in case the posts aren't big enough, also the copper material is more conductive and flexible
Solid Construction - Zinc Alloy construction for strong electrical conductivity, reduce current transmission loss. Also protect battery post against corrosion for long battery life time. Bonus 2 protective cover included
Four Wiring Outlet - 2/4/8/10 AWG Gauge Inputs. There are four different sizes of a wiring outlet, easy to modify the wiring