This connector kit allows for quick and convenient connect or disconnect of power from a winch or remote battery charger, trailer, etc. It is made of durable polycarbonate bearing over 10,000 connect or disconnect actions. The bottom of the devise features a fitted rubber boot to protect against dust, moisture and corrosion.
Both ends are suitable for connection to the power or load side because of its identical connectors. The connectors are ideal for 12-36 volts DC low-voltage and direct current use.
Featured with 0.25" inner diameter, the terminal pins accept wire from 6 to 8 gauge.
Easy to use and install. Insert the wires into the terminal pins, then solder or crimp them. Insert the terminal pins into the connector housing and lock them in place.
Two pairs of connectors with 4 connector ends, 8 terminal pins, and 4 rubber boot caps
Connector Dimensions: 1-7/8" long x 1-3/8" wide x 1/2" thick
Connected Set Dimensions: 3 3/16" long x 1 3/8" wide x 1/2"thick
Operating Temperature Range:-4°F-221°F / -20°C-105°C
Medium Withstanding Voltage: 2200DC
Vibration Resistance: Excellent
Impact Resistance: High
Connect/disconnect Cycles: 10,000 times
6-8 gauge wire; terminal pins diameter: 0.22"; voltage: 12-36 Volts DC; capacity: 50 Amps
Made of sturdy polycarbonate with fitted rubber boot covers; allows for quick power connection /disconnection from winches, trailers or other electrical devices
Simple Installation. Insert the wires into the terminal pins, then solder or crimp them. Connector ends are identical, so either ends is suitable for connection to the power or load side
Connector dimension: 1-4/5" L x 1-2/5" W x 3/5" H; connected set dimension: 3-1/5" L x 1-2/5" W x 3/5" H; package include: 4 X polycarbonate cover, 4 X hard rubber boot caps; 8 X terminal pins
1-year warranty; 100% replacement or 100% refund